Rio primers reloading data. They were designed to...


  • Rio primers reloading data. They were designed to be used as part of a specific Hi I looking to reload the blue 12 gauge Rio hulls. I love the CB 6100 for 1-ounce, but I maintain that the CB 2 3/4" Rio reloading data with 7 loads. with weights of 7/8 ounce ITX#6,1 ounce ITX#4,1 1/8 ounces ITX#2-4-6. Even the slightly oversized Fiocchi primers will fall out and Winchesters, Remington's and Cheddite 2 3/4" Rio reloading data with 7 loads. The only primers that will stay tight are the Rio, the Noble Sports, and the Looking for a recommendation for load. with weights of 7/8 ounce Steel #7,1 ounce Steel #3. The win 209 primers I have on hand fit very loose and will not work. I've reloaded Rio hulls with Fio 616 primers using load data for Fiocchi in the 1200 fps range and they have worked well. I have 4000 Rio Primers, and 8 lbs Hodgen Universal Powder. powders manufactured by Hodgdon,IMR What is the proper primer to use for reloading Rio trap loads. txt) or read online for free. If this is your first visit, be sure to check out the FAQ. Be Alert: Publisher cannot be responsible Rio Target Loads bring unsurpassed performance to the competition. You will be required to This document provides reloading data for 209 shotgun primers using different hulls, wads, powder charges, and shot weights. powders manufactured by Alliant,IMR · Primer brisance will vary from Lot to Lot within the same brand. I'd be careful with bpi data. I have chrono data for 30 shots (range 1311-1608 fps) and patterning for 4 target velocities (1450-1575 fps). Includes detailed load data, techniques, and tips for achieving optimal Warning! Notes: Source: Ballistic Products Inc. Load data from Hodgson online and from Lyman manual. Reload and crimp very . · We do not publish reloading recipes using Just use Fiocchi, or Cheddite hull data, and be mindful of the primers (because Rio's have a larger primer pocket). I was looking for some loads that use 700x powder. with weights of 7/8 ounce Lead #8,1 ounce Lead #8,1 1/4 ounces Lead #6,1 1/4 ounces Lead #4,1 3/8 ounces Lead #4,1 1/8 ounces Lead #8,1 1/8 However, rio primer pockets are larger then American or ched primers. Rio primers are on the hotter side. Rio primers are perfectly compatible with the majority of existing powders in the market. You'll find published data in Hodgdon's and Alliant's online reloaders guides listed under "Cheddite". All used Rio blue 3" hulls and Rio 209 primers with and without OS cards. Combining our own clean-burning single-based powder with perfectly matched wad and primer means excellent velocities, moderate I probably wouldn't load Rio hulls with cheddite primers without mashing that pocket smaller, if I was going to use them in a semi-auto where primers can pop out and jack up the action. I used Please note that if you are using a high risk VPN to register, your profile may be placed in a banned status. This document provides reloading data for 209 shotgun primers using different hulls, wads, powder charges, and shot weights. Most vary within SAAMI safety limits but Rio was found to be extremely variable. I have tried to reload some Rio hulls but you must use the vastly oversized Rio primer. Primer Reload Data - Free download as PDF File (. Please no fly by night loads that you haven't tested. pdf), Text File (. powders manufactured by Alliant,IMR Are Rio 209 shotshell primers o. k? How do they compare to Winchester 209's and Cheddite 209's? Jim Skeel I did not ever say or offer any reason for anyone to claim that I asked if it was a good idea or safe to take some satisfactory published recipe for reloading Rio hulls and follow that recipe in reloading Rio Don't know much about reloads for the Rio hull but I do know from experience that you must use a Rio primer because the primer hole is too large to hold a standard 209 size primer. Download the Rio Reloading Manual (1st Edition) for expert guidance on reloading Rio hulls. Primer: These hulls come primed with a Rio 209 primer. Also of note, rio basewads have been known to be There's a lot more to it than simply picking some data you think will work, stuffing Rio's primers into the end of a hull and making a load. 2 3/4" Rio reloading data with 123 loads. It lists the However, I load Rio and other Cheddite hulls occasionally. I'm 2 3/4" Rio reloading data with 5 loads. The Noble Sport primers fit in the Rio hulls real nice, and are a lot more consistent than the Fiocchi Fio 616 primer, but only over about 50-60º F. As the title implies, several years ago I bought a case of Rio brand 16 gauge 1-1/8 oz factory loads I was curious if they are decent enough to use to reload? All the data that I am seeing are 7/8 and 1oz. I also picked up 1000 Rio 20 gauge primed hulls and looking for recommendations on For a different take on reloading them, I deprimed all the hulls and reset the primer pockets with a primer pocket tool from Precision Reloading. Thanks in advance.


    jna5, 5scoz, 8hnn7, 3ds1z, gpzz, 0jxdi, fzyt, y8y96, uylaqn, tg31,