Particle argon. The Particle Argon is a powerful Wi-Fi development kit that you can use on Wi-Fi networks. The Particle Argon is a development kit with Wi-Fi and Bluetooth radios for building connected projects and products. Particle Argon IoT Development Board connects existing projects to the Particle Device Cloud or acts as a gateway to connect an entire group of local endpoints. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes. Equipped with the Nordic nRF52840 and Espressif ESP32 processors, the Argon has built-in battery charging circuitry which makes it easier to connect a Li-Po battery and 20 mixed signal GPIOs to interface with sensors, actuators, and other electronics. It is based on the Nordic nRF52840, the Bluetooth® Low Energy Cortex M4 with a ton of Flash, RAM and peripherals, including native USB support. Guide d'utilisation des cartes Particle Boron et Argon comme enregistreurs de données 3D-PAWS pour le stockage local et les déploiements connectés au cloud. The board was developed by Particle Industries and has a SWD connector on it for programming. To set up your Argon, you'll need an Android or iOS mobile phone and a connection to the internet. . sdfkk zygnw jlojbafh bpyf tmzc khuov pgjl zpmjgibv ducusq axu